Waeco coolair rt880, Operating Manual

Page: 34 / 340

EN
Using the parking cooler RT880/SP950
34
6.3 Remote control
The remote control is equipped with the following control elements for
operating the system:
7 Using the parking cooler
A
7.1 Tip for improved use
I
Observe the following instructions for use to ensure your WAECO CoolAir
parking cooler is used efficiently:
No. in fig. 3 ,
page 4
Meaning
1 STANDBY button
The system can be switched between active and standby modes.
2 Temperature – button:
The temperature – button decreases the temperature by 1 °C or
the timer running time by 10 minutes.
3 Temperature + button:
The temperature + button increases the temperature by 1 °C or
the timer running time by 10 minutes.
4 Mode – button:
The operating mode – button switches to the next mode down.
5 Mode + button:
The operating mode + button switches to the next mode up.
NOTICE!
 The manufacturer assumes no liability for non-observance of
this operating manual, in particular for any consequential dam-
age, especially consequential damage caused by failure of the
parking cooler.
 Do not insert foreign objects into the system.
NOTE
RT880 and SP950 are designed as air conditioning roof units for
relaxing rest periods. They can be used while driving, do not how-
ever replace the engine-powered vehicle air conditioning system.