ColdMachine
Safety instructions
29
2
1, page 3:
This refers to an element in an illustration. In his case,
item 1 in figure
2
on page 3.
Please observe the following safety instructions.
2
Safety instructions
Caution!
WAECO International will not be held liable for claims for damage
resulting from the following:
– Damage to the device resulting from mechanical influences
and overvoltage,
– Alterations to the device made without the explicit permission
of WAECO International,
– Use for purposes other than those described in the operating
manual.
2.1
General safety
z
Have a trained technician make installations in wet rooms.
z
Do not operate the device if it is visibly damaged.
z
This device may only be repaired by qualified personnel.
Inadequate repairs can lead to considerable hazards.
Should your device need to be repaired, please contact
WAECO customer services.
z
Never open the refrigerant circuit except at the connections that
have been provided for this purpose!
z
Set up the device in a dry location where it is protected against
splashing water.
z
Do not place the device near naked flames or other heat
sources (heaters, direct sunlight, gas ovens etc.).
z
Make sure that the compressor is sufficiently ventilated.
z
Electronic devices are not toys!
Always keep and use the device out of the reach of children.
z
Before you start up the device for the first time, check that the
operatingvoltage matches the battery voltage (see type plate).
z
Danger of fatalinjuries!
When using the device on boats:
if the device is powered by
the mains, ensure that the power supply has a residual current
circuit breaker!
_coldmachine.book Seite 29 Dienstag, 31. Mai 2005 3:15 15