Cleaning and maintenance
BordBar CDF-11
28
5.13
Replacing the plug fuse (12/24 V)
➤
Pull the adapter sleeve (fig.
3
4, page 3) off of the plug.
➤
Unscrew the screw (fig.
3
5, page 3) out of the upper half of the housing
(fig.
3
6, page 3).
➤
Carefully raise the upper half of the housing from the lower (fig.
3
1,
page 3) half.
➤
Take out the contact pin (fig.
3
3, page 3).
➤
Replace the defective fuse (fig.
3
2, page 3) with a new one that has the
same rating (T8A 32V).
➤
Re-assemble the plug in the reverse order.
6
Cleaning and maintenance
e
Caution!
Before cleaning or maintaining the cooler, pull the cable out of the
socket or the cigarette lighter.
a
Caution!
Never clean the device under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during clean-
ing as these can damage the device.
Never use brushes, scouring pads or hard or pointed tools to re-
move ice or to loosen objects which have frozen in place.
➤
Occasionally clean the device interior and exterior with a damp cloth.
_CDF-11.book Seite 28 Dienstag, 18. August 2009 7:22 19
www.busse-yachtshop.de | info@busse-yachtshop.de