Waeco Airton Service ST-8810, Operating Manual

Page: 19 / 192

EN
ST-8810 Operation
19
4 Operation
4.1 Powering On/Off
➤
Press the “On/Hold” button to power on the thermometer.
➤
Release the “On/Hold” button to read the display.
➤
Read the measured temperature on the display (fig.
4
).
The thermometer automatically powers off approximately 7 s after pressing
one of the buttons.
4.2 Selecting temperature unit (°C/°F)
➤
Press the “On/Hold” button to power on the thermometer.
➤
Press the “°C” button to set the unit to “degrees C” (fig.
5
).
➤
Press the “°F” button to set the unit to “degrees F” (fig.
6
).
✓
The chosen unit is indicated on the display.
4 Measuring indication 9 Backlight
5 Data hold
4
5 6
WaecoST-8810_OPM_4445103143_EMEA10_2020-08_06.book Seite 19 Donnerstag, 20. August 2020 7:19 19