Each digital input on the Wadia 27i can be configured as either ClockLink On or ClockLink Off.
Clocklink On: Should be used only with ClockLink sources, such as the Wadia 27i.
ClockLink Off: Should be used with all non-ClockLink sources.
To change the ClockLink configuration for any input, press the Enter key repeatedly until the
Configure ClockLink Screen for the desired input is displayed. The picture below shows the
Configure ClockLink Screen for Input 2 showing Clocklink On.
Using the Volume Up or Volume Down key, select the desired setting
FACTORY SETTING
As delivered from the factory, Input
1
is configured with ClockLink On. All other inputs are
configured for ClockLink Off.