Page 13
MACINTOSH INSTALLATION
1.
Plug the PenPartner USB connector into an active USB port on your computer or
an active USB hub.
2.
If your computer is off, turn it on now. The tablet LED will light to indicate
PenPartner has registered as a USB device. If the LED does not light, your USB
port may not be functioning properly; go to
PenPartner is working in mouse emulation mode. You should now be able to use
your UltraPen on the tablet to move the screen cursor.
Important: To use the full capabilities of PenPartner for pressure-sensitive
drawing and tracing, you must install the tablet software from the PenPartner
CD-ROM. Disable any virus protection programs and close all open
applications before installing the software.
3.
Insert the CD-ROM into your computer and double-click the Install PenPartner
icon to launch the install program. Choose your language option, click OK, and
follow the prompts.
After restating your computer, you will be able to use the pen to move the screen
cursor with absolute positioning. If you had any trouble with this installation, go to
Each time you start your computer, the Wacom Tablet startup icon tells you if the tablet
driver has successfully loaded.
The driver is loading.
The driver has loaded successfully.
The driver did not load.
The driver loaded, but a Wacom
tablet cannot be found. The tablet
may be unplugged.
To tablet
