6
6
HANDLING
WARNING
High Voltage. Do not open or disassemble the Cintiq interactive pen display. There is a risk
of electrical shock when the casing is open. This will also void your warranty and Wacom
shall have no responsibility to repair or replace the product.
Request assistance from another person or persons when lifting or moving this product. Physical
damage or personal injury may result from a single person attempting to carry this product.
Move this product in the following manner:
- Before moving Cintiq, adjust the pen display height and incline so the display stand
support arms are locked upright, with Cintiq positioned horizontally. Place all cables on
top of the stand base and ensure they do not hang free. Tripping over loose cables can
cause physical damage or personal injury.
- Request assistance from another person or persons. Each person should securely
grasp the lower part of a display support arm near the display stand base. With the
other hand, grasp the base of the stand at the front corner. Using care, lift and carefully
move this product while supporting the base of the stand.
Important: The assembly is heavy. Do not attempt to lift Cintiq by yourself. Each person should
use both hands to securely grasp the product. Grasp the stand base at the corner areas to avoid
any sharp edging. DO NOT lift the display unit itself, otherwise damage might occur to the LCD if
it flexes during movement. Also, the display unit does not have sufficient strength to support the
load of the stand hanging freely from it. Work together, and lift carefully.
- Locate Cintiq on a desktop or other working surface that is flat, clean, and free of any
moisture or oily film. Taking care not to pinch your fingers, do this by first placing the
rear half portion of the stand onto the table surface. Then slide the stand fully into place
so that it will not tip or fall.
- When in place, use the incline levers to rotate the display back to a vertical position.
