7
Tablet Driver Setup
Before installation, connect the BizTablet USB cable to your computer .
1
Insert the Tablet Driver CD-ROM into the CD-ROM drive of your
computer and the install menu should appear. If the menu does not
appear, double-click on the Install.exe icon located on the CD-ROM.
2
The Install Pen Tablet menu will display. Click OK and the license
agreement will appear.
3
Click Accept.
4
After installation is complete, click OK and finish the installation. If you
must renew your driver, click immediately Restart System and your
computer will automatically restart.
5
Refer to “Using the Control Panel” on page 12, open the control panel
and adjust the pen settings and positions.
Windows 98SE: The ADD NEW HARDWARE WIZARD will display. Follow
the prompts, selecting the default options. If prompted to install drivers
for the USB Human Interface Device, insert the Windows 98SE CD, click
OK, and enter the location of the Windows CAB
files (e.g., D:\WIN98). Note that the files may be located on your hard disk
in the C:\WINDOWS\OPTIONS\CABS folder.
Uninstalling the Tablet Driver
1
Click on the Windows Start button and open the control panel. Double
click the Add and Remove Program (Application) icon.
2
Select Pen Tablet from the list and click the Modify (Add) and Delete
button. Follow the instructions in the dialog box to initiate uninstall.
When Windows is restarted, the driver will be deleted.
BizTablet_EN.indd 7
05.6.16 3:27:56 PM
