Wacker Neuson RCE, Operator'S Manual

Page: 40 / 56

Maintenance RCE
40 Operator’s manual
Distribute the hydraulic oil
1. Insert the plug into the plug receptacle.
2. Extend and retract the thrust bolt approx. 3 times. For this press the ON/OFF
switch.
3. Completely extend the thrust bolt.
4. Pull the plug from the plug receptacle.
Top up with hydraulic oil
1. Place the machine so that the oil filler neck points vertically upward.
2. Unscrew the screw plug on the oil filler neck and remove with sealing ring.
3. Fill with hydraulic oil up to the lower edge of the oil filler neck.
4. Screw in the screw plug with sealing ring in the oil filler neck and tighten.