Operation
7.3 Raising and Lowering the Tower
58
Operator’s Manual | LTV 4L/6L | 5100065071 | 02/2023 | [en-US]
wc_gr013770
1
wc_gr013771
1
Fig. 30: Telescoping winch—raising and lowering
2.
Continue rotating the winch handle until the tower is at the desired
height. Do not overcrank the winch when the tower is fully extended.
Lowering the tower using the manual winch
Turn the handle on the telescoping winch
(1)
counterclockwise (“cable out”
direction) until the tower is lowered completely.
Raising the tower using the power winch
1.
Check the operation of the telescoping winch
(1)
. Turn the telescope
rotary switch
(2)
on the control panel to the UP position.
wc_gr013772
1
2
wc_gr013773
2
Fig. 31: Telescoping winch—raising and lowering
2.
Continue to hold the telescope rotary switch until the tower is at the de-
sired height. Release the switch when the tower is at the desired
height.
Summary of Contents for LTV 4L
Page 4: ...This page is intentionally left blank...
Page 104: ...Index 104 Operator s Manual LTV 4L 6L 5100065071 02 2023 en US...
Page 105: ......