8 Use and operation
18
100_0101_op_0003.fm
Connecting the machine to the electric power supply
The machine may only be connected to a three-phase inverter, connection values
see chapter
Technical Data
.
1. Switch off the machine via the ON/OFF switch.
2. If required, connect the machine to a permitted extension cable.
Note:
See chapter
Technical data
for the permitted lengths and cross-section
areas of extension cables.
3. Insert the plug into the plug receptacle on the inverter.
Switching IREN on
1. Use the protective hose to hold the machine near the vibrator head.
2. Switch on the machine via the ON/OFF switch.
Switching IREN ST1 on
1. Use the pipe to hold the machine near the vibrator head.
2. Switch on the machine via the ON/OFF switch.
NOTICE
Electrical voltage.
Incorrect voltage can cause damage on the machine.
Check if the voltage of the current source corresponds with the information
of the machine, see chapter
Technical Data
.
WARNING
Starting of the machine.
Danger of injuries from uncontrolled starting of the machine.
Deactivate the machine before connection to the electric power supply.
WARNING
Electrical voltage.
Injuries from electrocution.
Check power cable and extension cable for signs of damage.
Only use extension cables for which grounded conductors are connected to
the plug and the coupling (only for machines of class rating I, see chapter
Technical Data
).
