Emission Control Systems Information and Warranty
52
wc_tx001772gb.fm
What is not covered
Failures other than those resulting from defects in material or workmanship.
Any systems or parts which are affected or damaged by owner abuse,
tampering, neglect, improper maintenance, misuse, improper fueling,
improper storage, accident and/or collision; the incorporation of, or any use
of, add-on or modified parts, or unsuitable attachments, or the alteration of
any part.
Replacement of expendable maintenance items made in connection with
required maintenance services after the item’s first scheduled replacement
as listed in the maintenance section of the engine/equipment operator’s
manual, such as spark plugs and filters.
Incidental or consequential damages such as loss of time or the use of the
engine/equipment, or any commercial loss due to the failure of the engine/
equipment.
Diagnosis and inspection charges that do not result in warranty-eligible
service being performed.
Any non-authorized replacement part, or malfunction of authorized parts due
to use of-non authorized parts.
Owner’s Warranty Responsibility
The engine/equipment owner, is responsible for the performance of the required
maintenance listed in the Wacker Neuson engine/equipment operator’s manual.
Wacker Neuson recommends that all receipts covering maintenance on the
engine/equipment be retained, but Wacker Neuson cannot deny warranty
coverage solely for the lack of receipts or for the failure to ensure the performance
of all scheduled maintenance.
Normal maintenance, replacement, or repair of emission control devices and
systems may be performed by any repair establishment or individual; however,
warranty repairs must be performed by an authorized Wacker Neuson dealer/
service center.
The engine/equipment must be presented to an authorized Wacker Neuson dealer/
service center as soon as a problem exists. Contact Wacker Neuson Product
System Covered
Components
Evaporative emissions
Fuel tank (if applicable)
Fuel tank cap (if applicable)
Fuel line (if applicable)
Fuel line fittings (if applicable)
Clamps (if applicable)
Carbon canister (if applicable)
Purge port connector (if applicable)
Miscellaneous parts associated with the
evaporative emission control system
Clamps
Gaskets
Mounting brackets
