Wacker Neuson EH 23 Low Vib, Operator'S Manual

Page: 33 / 50

EH 23, 27 Maintenance
33
Lubricating the machine
1. Remove any dirt around the zerk fitting.
2. Place filled manual grease gun onto the zerk fitting and operate approx.
20 times.
Note: Only use special lubricants for lubricating, see chapter Technical Data .
3. Wipe the area around the zerk fitting with a clean cloth.
WARNING
Excessive grease can conduct electricity.
Injuries from electrocution.
f Position the grease gun so that no excess grease is spread in the equip-
ment.
f Wipe off excessive grease.
Item Designation
1 Zerk fitting