6 Components and operator's controls
100_0202_cp_0006.fm
20
Control handle
The control handle is used to continuously regulate the speed and travel direction.
Footrest of center pole lock
The footrest of the center pole lock is used to release the center pole from the transport position so that
it can be returned to working position. The individually adjusted working height is maintained.
Emergency shutdown switch
The emergency shutdown switch is used solely to deactivate the machine in the case of danger.
Activating the emergency shutdown switch results in the machine immediately turning off. Operation can
only be resumed after unlocking the emergency shutdown switch.
Height adjustment mechanism of center pole
The center pole height-adjustment mechanism allows for continuous height adjustment in order to adjust
the center pole individually to the optimum working height. This is done by turning the star knob.
In addition, by pushing down on the star knob, the center pole can be brought into the lower position e.g.
to be able to travel through low passages. If the center pole is raised, the respective optimally adjusted
working height is once again active.
ON/OFF switch (red)
With the red ON/OFF switch, the machine is activated for starting with the start button on the center pole
head or remote control.
The machine is completely deactivated with the ON/OFF button.
With the ON/OFF switch, the diagnostic and configuration menus can also be called up and menu items
can be changed.
Setting key
With the black setting key, digits of the activation PIN, setup PIN, or machine settings can be adjusted.
Item
Designation
Item
Designation
1
Hood opener
7
Vibratory rammer
2
ON/OFF switch (red)
8
Control handle
3
Display and control lamps (diagnostic and
configuration menu)
9
Height adjustment mechanism of center pole
4
Adjusting key (black)
10
Footrest of center pole lock
5
Start button
11
Emergency shutdown switch
6
Slow/fast rocker switch
2
3
4
5
6
7
11
8
9
10
1
