Wacker Neuson BS 50-2, Operator'S Manual

Page: 37 / 42

wc_tx003552gb_FM10.fm
37
Rammer Operation
4.3 Refueling the Machine
Requirements
■
Machine shut down
■
Engine cool
■
Machine standing upright on the ramming shoe
■
Fresh, clean fuel supply
Procedure Perform the procedure below to refuel the machine.
1. Remove the fuel cap (a) .
2. Fill the fuel tank up to the base of the neck (b) .
3. Re-install the fuel cap.
Result The machine has now been refueled.
WARNING
Fire and burn hazard. Fuel and its vapors are extremely flammable.
►
Keep all sources of ignition away from the machine while refueling.
►
Do not refuel if the machine is positioned in a truck fitted with a plastic bed liner.
Static electricity can ignite the fuel or fuel vapors.
►
Refuel only when the machine is outdoors.
►
Clean up spilled fuel immediately.
wc_gr011467
BS 50-2i, BS 60-2i, BS 70-2i BS 50-2, BS 60-2, BS 70-2, BS 65-V
a
b
CAUTION
Fire and health hazard. Fuel expands when heated. Expanding fuel in an over-filled
tank can lead to spills and leaks.
►
Do not overfill the fuel tank.