Maintenance
9.3 Maintenance work
38
Operator’s Manual | BS-4 | 5100060095 | 07/2022 | [en]
1.
Remove dirt.
2.
Provide a suitable container for draining the used oil.
3.
Unscrew the sight glass.
4.
Clean the thread on the sight glass.
5.
Tilt the machine backwards until it is resting on the guide bracket.
6.
Allow the used oil to drain completely.
7.
Tilt the machine forward and secure it in this position.
8.
Fill oil into the housing through the opening in the sight glass,
.
9.
Tighten the sight glass.
10.
Place the machine in upright position to check the oil level.
11.
If necessary, top up oil until the sight glass ½ to ¾ is filled.
12.
Tighten the sight glass again. Tightening torque 9 Nm.
13.
Wipe the area of the sight glass with a clean cloth.
9.3.8
Check screw connections of the ramming plate
1.
Check all screw connections for tightness at regular intervals.
2.
Tighten loose screw connections.
