Wacker Neuson 803 Dualpower, Service Manual

Page: 92 / 196

3-54
SHB 803 en – Edition 2.4 * 803s314.fm
Maintenance
3.20 General maintenance
Cleaning
Cleaning the machine is divided into 2 separate areas:
• Exterior of the machine
• Engine compartment
The wrong choice of cleaning equipment and agents can impair the operating safety of the
machine on the one hand, and on the other undermine the health of the persons in charge
of cleaning the machine. It is therefore essential to observe the following instructions.
General instructions for all areas of the machine
Cleaning with washing solvents
• Ensure appropriate room ventilation
• Wear suitable protective clothing
• Do not use flammable liquids, such as gasoline or diesel
Cleaning with compressed air
• Work carefully
• Wear safety glasses and protective clothing
• Do not aim the compressed air at the skin or at other people
• Do not use compressed air for cleaning your clothing
Cleaning with a high-pressure cleaner or steam jet
• Electrical components and damping material must be covered and not directly exposed
to the jet
• Cover the hydraulic oil reservoir and the covers of the fuel tank, the hydraulic oil
reservoir, etc.
• Protect the following components from moisture:
• Engine
• Electrical components such as the alternator, etc.
• Control devices and seals
• Air intake filters, etc.
Cleaning with volatile and easily flammable anticorrosion agents and sprays:
• Ensure appropriate room ventilation
• Do not use unprotected lights or open flames
• Do not smoke
Control stand
Caution!
Never use high-pressure cleaners, steam jets or high-pressure water to clean
the control stand. Water under high pressure can
• penetrate into the electrical system and cause short circuits and
• damage seals and disable the controls!
We recommend using the following aids to clean the control stand:
• Damp cloth
• Brush
• Water with mild soap solution