OM 803 us – Edition 3.7 * 803b210us.fm
2-9
Safety instructions
Shatter protection (Option)
The optional shatter protection protects the operator against material falling from the front.
WARNUNG
DANGER
Piercing/penetration hazard by fragments from the front!
Causes serious or deadly injuries.
• A shatter protection must be installed on a canopy version if an attachment (for
example a hammer) causes fragments to fly around.
• This shatter protection takes over the function of a front window.
• Machine operation is prohibited under these conditions without the operator
safety shield installed.
WARNUNG
WARNING
W
Personal injury hazard! Do not modify the shatter protection.
Failure to follow this precautionary measure can lead to severe injury or death.
• No drilling, cutting or grinding.
• Do not mount any brackets.
• Do not perform any welding/bonding work.
• Replace the complete protective structure if it is damaged, deformed and/or
cracked.
• If you are not sure, always contact a Wacker Neuson dealer.
• Repair work may be performed by a Wacker Neuson dealer only.
Important
Do not use brushes, steel wool or other abrasive cleaners for cleaning the
polycarbonate disc. Do not wipe dust in a dry state.
Work range and restricted visibility
WARNUNG
WARNING
W
Accident hazard! The size of the work range depends on the
attachment used.
Can cause serious injury or death.
• – see Operator’s Manual of attachment
– see example: work range with hydraulic hammer
• Do not use the attachment outside the defined work range.
NOTICE
Stop machine operation when visibility is restricted due to rain, snowfall, dust
etc.
☞
Resume work only if visibility is no longer restricted.
0°
70°
70°
120 cm
(47 in)
Fig. 46: Example: work range with hydraulic hammer
