wc_tx000178gb.fm
28
Maintenance
PG 2A / 3A
5.3
Cleaning the Pump
After pumping water containing a large amount of dirt or debris, clean out inside of
pump housing.
1. Remove drain plug
(b)
from pump housing and drain any water left in pump.
2. Loosen the four knobs holding the pump cover
(a)
and remove cover.
3. Clean out dirt and debris. Inspect impeller and volute insert for wear.
The impeller may develop sharp edges. Use care when cleaning around impeller to
avoid getting cut.
WARNING
w c _ g r 0 0 0 8 3 7
=
>
