3-60
OM 28Z3 US – Edition 2.0 * * 28Z3b340.fm
Operation
3.31 Hydraulic quickhitch (option)
Caution!
Before putting this feature into operation, specific training must be performed
by authorized technical staff and must be understood by the operator. For
reasons of safety, the quickhitch must be operated with two control elements!
This avoids opening the quickhitch unintentionally during work operation.
Maintenance
Important!
Before picking up an attachment, the operator must make sure it can be hitched
correctly by removing all dirt on either claw of the quickhitch.
Perform maintenance on the quickhitch system once a day with the other mainte-
nance work for the machine.
Perform visual checks for possible defects, damage or cracks.
Remove all dirt on and around moving parts.
The claws must be clean and slightly greased.
Apply grease to the pins via grease nipples
S
.
Apply grease to the friction surfaces of the lock mechanism via 2 further grease nipples
N
on either side of the quickhitch (see
).
Before starting work, check the acoustic signal which must be audible when pressing
switch
B
.
Fig. 80: Lubrication
S
S
N
Summary of Contents for 28Z3
