Trav-L-Cutter
4
Part No. 02-MAN-01, Rev. A
E.H. Wachs
corrosion resistant
Corrosion from constant exposure to salt water can be minimized with an accessory package that
includes extensive use of stainless steel fasteners, special bearings and seals and high zinc coating.
operates anywhere
With air or hydraulic power, the Trav-L-Cutter will operate on horizontal or vertical pipe, in the
field or in the shop. It cuts and bevels in a mud filled ditch or under water, where it has been used in
chambers and free diving to depths of 600 feet.
Safe, cold cutting
The Trav-L-Cutter can be used in explosive conditions, onnatural gas, crude, product and fuel
lines. It has even been used to cut missile fuel cells.
Fast, reliable
A standard wall pipe can be cut and beveled with a cutting speed of approximately 2 minutes per 1”
of pipe diameter. Cutting time varies for heavier walls and harder alloys. Due to its rugged con-
struction, it is not unusual to find machines still operating after 10 or 20 years of severe service.
Included with your TRAV-L-CUTTER:
• Operating Manual and Isometric Parts List, Operating Tools, and spare Chain Connecting Pins.
• Basic Mounting Chain for 6” dia. pipe
• Steel Storage Case
• 6-ft. Hose Whip with oiler (air only)
Summary of Contents for Trav-L-Cutter E
