Trav-L-Cutter
6
Part No. 02-MAN-01, Rev. A
E.H. Wachs
•
SECURE LOOSE CLOTHING AND JEWELRY.
Secure or remove loose-fitting clothing and jewelry,
and securely bind long hair, to prevent them from getting caught in moving parts of the ma-
chine.
•
FOLLOW SAFE PROCEDURES FOR HANDLING LUBRICANTS.
Refer to the manufacturer’s instruc-
tions and the Mate rial Safety Data Sheets.
Safe Operating Environment
• Do not use this equipment in a potentially explosive atmosphere. Fire or explosion could result,
with the risk of serious injury or death.
• Provide adequate lighting to use the equipment, in accordance with worksite or local regula-
tions.
•
KEEP WORK AREA CLEAR.
Keep all clutter and nonessen tial materials out of the work area. Only
people directly involved with the work being performed should have access to the area.
Operating and Maintenance Safety
•
This equipment is to be operated and maintained only by qualified, trained personnel.
• Make sure the equipment is stable when attached to the workpiece for the operation. Ensuring
stability of the installed tool is the responsibility of the operator.
• Make sure the workpiece is supported adequately for installation of the equipment. This
includes supporting any workpiece “fall-off” section when severing the workpiece. Ensuring
support of the workpiece is the responsibility of the operator.
• Tooling on any cutting equipment—including lathe tools, saw blades, milling tools, etc.—may
get very hot. Do not touch tooling until you have made sure it is cool enough to handle.
• Wear gloves when removing or cleaning up chips and cutting debris. Chips can be very sharp
and cause cuts.
• Before performing any service on the equipment, dis connect the power source. Follow all
lock-out/tag-out procedures required at the worksite.
Safety Alerts in This Manual
The following alerts are used throughout this manual to indicate operator safety hazards. In all
cases, these alerts include a notice describing the hazard and the means to avoid or reduce risk.
Carefully read all safety alerts.
This icon is displayed with any safety alert that indicates a personal injury
hazard.
WarninG
This safety alert, with the personal injury hazard symbol, indicates a potentially hazardous
situation that, if not avoided,
could
result in
death or serious injury
.
Summary of Contents for Trav-L-Cutter E
