Wachendorff ETHSW50K, Operating And Installation Instructions, Page: 6 / 12

Operating and Installation Instructions
- 6 - Stand: 24.05.2019
5. Installation
5.1 Mechanical Installation
5.1.1 Mounting on the DIN rail
The ETHSW50K is equipped with a DIN rail holder on the rear side. Please follow the steps below
for proper mounting on the DIN rail:
1. Tilt the module backwards with the top and press it onto the DIN rail. Align the
module straight.
2. Press the module down on the DIN rail until it is properly fixed on the rail. Then close
the lock on the underside by moving it upwards. The lock is correctly performed when
you hear and perceive a click.
Note: If the fixing clip has come loose from the holder, it must be reassembled as follows.
2
1