Operating and Installation Instructions
- 4 -
Stand: 24.05.2019
3.
Device description
ETHSW50K
5 x 10/100BaseT(X)
Unmanaged / Plug and Play
IEEE 802.3, IEEE 802.3u, IEEE 802.3x
IEEE 802.3az: EEE (Energy Efficient Ethernet)
Broadcast- und Multicast-Flooding Storm Control
Redundant voltage input /
fault signal relay Output
Operating temperature -20 °C to +60 °C
Protection class IP30
3.1 Specifications
Technologies
Operating mode
Store and Forward
Switching engine
Wire-speed / non-blocking
Standards
IEEE 802.3 (10BaseT)
IEEE 802.3u (100BaseTX)
IEEE 802.3az (EEE)
IEEE 802.3x (Full Duplex) and Back-Pressure (Half Duplex)
Interfaces
RJ45 - Ports (copper)
5x 10/100BaseT(X)
RJ45 - Speed
Auto Negotiation (10/100 Mbps)
RJ45 - Duplex
Half- or Full-Duplex
RJ45 - Connection
MDI/MDIX Auto Crossover
Fault alarm contact
Fault alarm relay for detection of power supply (normally
open, normally open, max. 1A / 24 VDC)
2 x DIP switches
1 x On/Off Power Alarm (fault signal contact) (DIP 1)
1 x On/Off Flooding Storm Control (DIP 2)
Features
MAC table size
1K
Display
1 x Alarm
ALM: Power supply failure
2 x Power Status
P1, P2: Power supply status
5 x Ethernet port status
Link & Speed
Power supply
Execution
Redundant input terminal strip plug, reverse power protection
(reverse polarity protected)
Voltage range
12 VDC to 58 VDC
Current consumption
30 mA at 48V, 25 °C, full load