9
1.
Screws
2.
Mounting Bracket
3.
Trim Ring
4.
Motor
1.
Secure all wire connections with supplied wire ties to assist in
canopy installation.
2.
Tuck connections neatly into ceiling outlet box.
3.
Slide the motor up to the mounting bracket and place the key
hole on the motor over the screw of the mounting bracket.
4.
Turn motor until it locks in place at the narrow section of the
key holes.
5.
Note: Make sure the receiver sits flat and does not interfere
with the hook
per Diagram 7
.
6.
Align the circular hole on canopy with the remaining hole on
the mounting bracket. Secure by tightening the two screws
previously loosened and the two screws previously removed.
7.
Raise up trim ring and line up the 4 tabs with the 4 grooves
on the mounting bracket. Once lined up, slide the trim ring
and secure it to the canopy until snug.
F-082L/ F-084L
1
7
09
FINISHING THE INSTALLATION
