WAC San Francisco Flush, Installation Instructions Manual

Page: 13 / 33

07
HANGING THE FAN MAKING THE ELECTRICAL CONNECTIONS
F-082L/ F-084L
1 3
1. Connect the ground wire from the mounting bracket, the
outlet box , and t he receiver , all together . Continue to make
all other connections per Diagram 6. Make sure all
connections are made correctly or you will permanently
damage the receiver.
You may also refer to the labels on the receiver wires for
direction on how to make proper connections.
Use
D Hardware.
WARNING:
Failure to connect ground wires could result in
poor fan control functionality.
2. Connect the red wire from the fan to the red wire marked
“TO MOTOR” from the receiver.
3. Connect the grey wire from the fan to the grey wire marked
“TO MOTOR” from the receiver.
4. Connect the yellow wire from the fan to the yellow wire
marked “TO MOTOR” from the receiver.
5. Connect the white wire from the fan to the white wire
marked “FOR LIGHT” from the receiver.
6. Connect the blue wire from the fan to the blue wire marked
“FOR LIGHT” from the receiver.
7. Connect the black (hot) wire from the ceiling to the black
wire marked “
LINE IN HOT ” from the receiver.
8. Connect the white (neutral) wire from the ceiling to the white
wire marked “
LINE IN NEUTRAL ” from the receiver.
Black(Hot)
can be RED from Switch leg
Black(Line in H)
GREY(to Motor)
YELLOW(to Motor)
RED(to Motor)
GREEN(Ground)
WHITE(Neutral)
WHITE(Line in N)
GREEN(GND Must Use)
BLUE (to Light)
WHITE(to Light)
GREY(to Receiver )
RED(to Receiver )
YELLOW(to
Receiver
)
Outlet
Box
Receiver
GREEN( Mounted bracket ground )
WHITE (for Light)
BLUE (for Light)
6