![WAC Lighting Volta 2](http://html1.mh-extra.com/html/wac-lighting/volta-2-led-series/volta-2-led-series_installation-instruction_3124350004.webp)
4
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. August, 2017
waclighting.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
Invisible Trim Housing Installation
1. Repeat the same procedure as above from step 1 to step 6.
2. Raise the invisible trim frame aligning stand to hole, and secure to trim
mounting plate by using the screws supplied. Put plaster shield inside
trim opening (See
FIG. 12
).
3. Apply plaster or spackle over invisible trim frame and sand surface
when dry for a finished look (See
FIG.13
).
4. Remove the plaster shield when finishing is complete (See
FIG.14
).
5. Refer to installation instructions for appropriate trims to complete
the installation.
INSTALLATION INSTRUCTION
Volta 2” LED - New Construction Round Housing
R2RNT, R2RCT, R2RNL, R2RCL
Trim Frame
Shield
Aligning Stand
and Aligning Hole