WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. MAy 31, 2016 10:13 AM
waclighting.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
6
INSTALLING A TIMER
1. Unplug the transformer from the outlet, open the enclosure
2. Unplug the short timer cord inside the enclosure
3. Plug in the timer, plug the short timer cord into the timer
4. Set the timer according to the instructions provided with the time
l
k
l
c
c
TIMER MODULE
RECEPTACLE
PHOTOCELL PLUG
PLUG PHOTOCELL
HERE
(CREMOVE JUMPER)
`
l
j
N
O
s
N
P
s
N
Q
s
N
R
s
=
Do Not Exceed 0.625 Amps on primary
Short Timer Cord
Timer Plug
Timer
INSTALLATION INSTRUCTION
Magnetic Transformer
9075-TRN-SS / 9150-TRN-SS / 9300-TRN-SS
CHECK THE SYSTEM
After installing the entire low voltage system, operate the system for five minutes. On the low voltage side, all electrical connection spots
should be cool to touch. If a connection is hot to the touch, retighten the connection and check to ensure that the temperature decreases.
Place the transformer cover back and tighten all four provided screws on both sides.
If there’s any irregularities, email or call WAC Lighting “Technical Support” at [email protected], (800)526.2588.
