4.
Available Measurements and Product Description
• The adapter can test the electrical safety and function test of mode 3 electric vehicle charging equipment (EVSE)
with type 2 connector (or optional type 1
adapter
).
• PE
Pre-Test
(potential
presence
of
dangerous
voltage
at
PE.
terminal
by
mistake)-touch
electrode
and
led
lamp.
• phase
indicator(presence
of
all
three
phase
voltages
measured
to
N)-three
led
lamps.
• PP
state
simulation
(NC,13A,20A,32A,63A)-rotary
switch.
• CP
state
simulation
(A,B,C,D)-rotary
switch.
• CP
error
“E”
simulation
(cp
signal
short-circuited
to
PE)-push
button.
• PE
error
(earth
fault)simulation
(interruption
of
PE
conductor)-push
button.
• Measurements on live conductors (L1,L2,L3 and n)and on PE conductor -five 4 mm safety sockets for connection
to installation testers.
• Test
of
cp
signal-two
4mm
safety
sockets
for
connection
to
an
oscilloscope.
• Mains
socket
(on
backside)
to
connect
an
external
load
for
test
purposes
only.
Test Adapter for Electric Vehicle Charging Stations
6
