19
Function and operation
8
Function and operation
To use the functions of the training model, first carry out the following steps:
1.
Start-up
See:
Â
2. Switching on the ignition
See:
Â
chapter "7.3 Switching on the ignition", page 17
3.
Parameterisation of EBS 3 (only required for initial start-up)
See:
Â
chapter "7.4 Initial start-up of EBS 3", page 18
The most versatile functions of a modern truck can be demonstrated on the training model.
The training model has the following functions:
•
ECAS air suspension including liftable and lowerable lifting axle
•
Brake with brake pedal
•
Lighting
• System for targeted fault simulation
•
Quick release fasteners for line replacement
•
Control switch in the training model driver's cab
•
External remote control unit: ECAS remote control unit
•
LEDs to indicate faults
8.1
Brake function
The brakes of the training model can be controlled either by the brake pedal or the park brake.
•
The harder you depress the brake pedal, the stronger the braking force on the wheels.
•
The motors that drive the wheels switch off automatically when the pedal is pressed.
•
The brake functions even if the training model is not connected to a power source.
Summary of Contents for Truck Training Model
Page 1: ...Truck Training Model Operating Instructions...
Page 52: ...52 EEC declaration of conformity 14 EEC declaration of conformity...
Page 54: ...54...
Page 55: ...55...
