WABCO TAILGUARD, System Description

Page: 62 / 64

62
Appendix
Mechanical installation
A diagram of photo is available for the ultrasonic sensors’ positioning.
It has been clarified where the Electronic Extension Module is to be installed and all cable lengths have been
adequately dimensioned.
The Trailer Remote Control location has been defined.
Electrical installation
A vehicle circuit diagram is available for correct connections at the fuse box.
Information for integration into the braking system
Access to the C3 signal is accepted by the vehicle manufacturer or is documented in his system description.
A pneumatic circuit diagram is available for optimum integration in the pneumatic system.
All threaded connections required to integrate TailGUARD into the existing pipe system are available in
accordance with vehicle manufacturer’s specifications.
Other subjects for preparing the vehicle
The employees are qualified and the documentation "TailGUARD Truck & Bus System description" is
available.
A WABCO Trailer EBS Training with certification for PIN 1 has been completed.
A WABCO Trailer EBS Training with certification for PIN 2 has been completed and a configured parameter
set is available to put the system into operation.
A vehicle registration office is within reach and a copy of the TÜV certificate is available (only required if
TailGUARD intervenes in the braking system).
The installation has been documented with images.
A test schedule for the installed TailGUARD system is at hand.
A TailGUARD user information has been added to the vehicle operating manual.
A driver trailing is planned after TailGUARD has been installed.