WABCO TAILGUARD, System Description

Page: 29 / 64

29
Installation
FEATURES TailGUARD TailGUARD
ROOF
TailGUARDMAX
Typical logistical
environment
Loading ramps and large
objects, such as palettes,
vehicles and posts of
metal or wood that vary in
shape and size and are
unknown to the driver.
Areas with restricted
heights: e.g. warehouses,
loading gates, trees and
roof constructions.
Areas with small and / or
moving objects: e.g. forklift
loading, street signs, shops,
residential areas.
Tested to ISO 12155.
Number of ultrasonic
sensors (dot = Ultrasonic
sensor)
3x 5x 6x
Areas covered by ultrasonic
sensors
(View from top of vehicle)
The entire rear of the vehicle is covered by The entire rear of the vehicle is covered by ultrasonic sensors. .
1 and 2 indicate 1 and 2 indicate objects behind the vehicle.
Areas covered by ultrasonic
sensors
(side view)
Each bar represents a
distance of 50 cm.
Red: 0 to 150 cm
Yellow: 150 to 300 cm
Green: 300 to 400 cm
In close proximity
(red LEDs) the following
also applies:
Each LED has 2 states,
constant and flashing.
This indicates the distance
with a precision of 25 cm.
Indication on the Trailer
Remote Control
Display
Floor height
Display
Roof height
Indication on the Trailer
Remote Control
The level with nearest
object will be displayed.
Sensitivity of the ultrasonic
sensors
Big moving objects are
detected independent
of one another and
displayed.
Objects at ground
level and roof level are
detected and displayed,
independent of one
another.
Small moving objects are
detected independent of one
another and displayed.
Distance indication
(mode) ISO 12155 or
WABCO Standard
ISO 12155 or
WABCO Standard
ISO 12155
Ultrasonic sensor position
according to drawing
841 802 281 0 841 802 284 0 841 802 282 0
drawings
http://www.wabco.info/i/1365