10
OnSide Warnings, Cautions and Operating Guidelines
4.4 System Malfunction Information
WARNING
Modifi cations to electronic components and their software as well as wiring can impair their function and/
or the function of other networked components. In particular, systems relevant to safety could also be
a
ff
ected. As a result, these may no longer function as intended and/or jeopardize the safe operation of
the vehicle. There is an increased risk of an accident and injury. Never tamper with the wiring as well as
electronic components or their software. You should have all work to electrical and electronic equipment
carried out at a qualifi ed specialist workshop.
If there is a malfunction and the system cannot provide assistance, the LED indicator (mounted on the
A-pillar) may not illuminate at all, may continuously be illuminated or may blink intermittently. If the vehicle
is equipped with the WABCO OnGuard dash display, during a malfunction OnSide, may not be listed/recog-
nized in the OnGuard display "SYSTEMS DETECTED" start-up menu. When there is a BSD system mal-
function, it may not warn correctly when a moving vehicle is detected in the passenger side blind spot zone.
Whether or not the system is functioning correctly, it is the driver’s responsibility to react to changing road
conditions to maintain vehicle control. Failure to do so can result in serious personal injury or death and/or
severe property damage.
