WABCO OnGuard, Installation Instructions Manual, Page: 6 / 32

6
Installation Procedures
3 How to Obtain Parts and Kits
Contact Meritor’s Commercial Vehicle Aftermarket at 888-725-9355.
4 OnGuard™ Collision Mitigation System (CMS) Kit
This technical bulletin provides procedures for installing parts included in the OnGuard™ Collision Mitiga-
tion system kit.
The following parts are included in the kit.

Radar Sensor

Radar Bracket

OnGuard™ Display

Fascia

Radar Harness

Engine and Cab Harness

Pressure Sensor

Pressure Sensor Engine and Cab Harness

1939 Jumper Harness (for Cummins engine only)

1/2” Flange Bolts

Radar and Fascia M6 Nuts
NOTE: Make sure to verify the correct kit part number is being installed on the vehicle as all CMS radars
look alike.
5 Installation Procedures
5.1 OnGuard™ Radar Installation
1. Check the parts in the kit against the parts list and make sure the kit is complete.
2. Wear safe eye protection. Park the vehicle on a level surface. Apply the parking brake. Ensure the
ignition is turned OFF.