W2IHY Master CD9, Assembly Instructions Manual

Page: 6 / 13

The following parts may be found in bag 1 envelope #3
( ) Install Diode D3 (Black Diode) note polarity
( ) Install Regulator REG1. It has a heat sink mounted on it
( ) Install switching diode D1 note polarity
( ) Install switching diode D2 note polarity
( ) Install RFC1 - 470 uh molded RF choke yellow -purple- brown
(It looks like a 1 watt resistor and has a green or tan body)
( ) Install RFC2 - 470 uh molded RF choke yellow -purple- brown
( ) Install RFC3 - 470 uh molded RF choke yellow -purple- brown
( ) Install JMP1(2 Pin male header) on Pin side of the board
(INSTALL ON BACK OF BOARD)
( ) Install Q1 - 2N3417
( ) Install T1 - Note where primary side of transformer is
( ) Install a 16 Pin DIP socket at U3
( ) Install a 16 pin DIP socket at J1
( ) Install a 16 pin DIP socket at U4
( ) Install a 14 pin DIP socket at U1
( ) Install a 14 pin DIP socket at U2
YOU HAVE COMPLETED WIRING THE PC BOARD
White or black band on end
-5-
No part installed in parts filled in GREY (C5,R23, R24)