7
If an error message icon is displayed, press the
on / off switch. An error code is displayed:
ERRO 1: Motor error
ERRO 2: Handle error
ERRO 3: Control error
ERRO 4 The brake does not work
ERRO 5: Surge protection
ERRO 6: Communication error - the scooter is
not receiving a signal from the control panel
ERRO 7: Communication error - the control panel
is not receiving a signal from the scooter
Displays speed in km / h or miles / h.
Delay 1 0 ms
The scooter displays the speed using sensors
Gear, a higher number indicates a higher gear if
the value is 0 when the engine is off
Lights icon, hold down the MODE button to turn
the lights on / off
Cruise control: Hold a steady speed for 5
seconds to start cruise control, the corresponding
icon will be displayed. To deactivate cruise
control, brake or change speed
Starting method: Just add speed and the scooter
will start (Zero), it is necessary to bounce your
feet and then add gas (Non)
USB
If another device is connected via USB, the icon
will light up if the device draws more than 100
mA, the icon will start flashing if the device draws
more than 500 mA.
SETTINGS
P01
– backlight
1 (lower)
– 3 (higher)
P02
– speed unit
0 (km) 1 (mile)
P03
– voltage
24 V, 36 V, 48 V
Default value 48 V
P04
– power save mode
0 off, any other value from 1 to 60 indicates the
number of minutes of inactivity to activate the
power save mode
