W Box 0E-43LED, User Manual

Page: 15 / 23

Closed Caption
Press [
▼
] to select the menu "Closed Caption" and then press [ u ] or [ OK ] to enter it, as shown below.
Menu Settings
Press [
▼
] to select the menu "Menu Settings" and then press [ u ] or [ OK ] to enter it, as shown below.
CC Mode
Basic Selection
Advance Selection
Option
Press [
t
] or [
u
] to select On/CC On Mute/Off
Caption mode, selection: CC1/CC2/CC3/CC4/Text1/Text2/Text3/Text4/Off
Selection: service 1/service 2/service 3/service 4/service 5/service 6/Off, It is enable
only in DTV source
Caption Option
Transparency
OSD Time
To adjust the OSD menu transparency
Set the OSD menu display time: 5sec/15sec/30sec/45sec/60sec
Select
Move
MENU
Return
V-Position
Clock
Phase
Auto
H-Position
0
0
1 0 0
0
VGA Settings
Use for adjusting display images when in PC mode. Only for
PC mode.
Note : Under PC source mode, if there is no signal input, the
device will enter power saving state after one minute. When
PC signals are connected, the device will wake up and
display normally.
DTV program clock information
Clock
Set a time for the system to auto enter the standby state: Off/5min/10min/15min/30min/60min/
90min/120min/180min/240min
Time zone selection: Eastern/Central/Mountain/Pacific/ Alaska/Hawaii/Atlantic
Auto sync clock from digital stream; Selection: On/Off
Daylight Saving Time; Selection: On/Off Sleep Timer
Time Zone
Auto Sync
DST
Select Move
MENU
Return
Sleep Timer
Time Zone
Auto Sync
DST
Clock
Off
Atlantic
Off
Off
1980 1 6 3:16 A M
RRT Setting
Set the rating region table that defines the rating standard
for a particular geographic region and/or country. The
menu may vary depending on the local broadcasting
system. This setting is not available in the United states.
Reset RRT
Reset all options in the filtering options.
Time
Press [
▼
] to select the menu "Time" and then press [
u
] or
[ OK ] to enter it, as shown below.
14
General Operating Instructions
Canada
16+ : Applicable to children above 16
18+ : Only applicable to people no younger than 18
EXEMPT : Exempt programming