W Box 0E-43LED, User Manual

Page: 12 / 23

11
General Operating Instructions
Select Move
MENU
Return
Personal
Off
RAW
English
7 5
7 0
5 0
Sound Mode
Bass
Treble
Balance
Surround
SPDIF
Audio Language
Sound
Sound Mode
Bass
Treble
Balance
Surround
SPDIF
Audio Language
Select from five sound modes: Standard/Music/Movie/Sports/Personal
Adjust bass value of 0-100
Adjust treble value of 0-100
Adjust
the sound output proportion of the left and right sound channels within 0-100.
When you set the analog value as 0, there will be no sound from the right speaker. When
you set the analog value as 100, there will be no sound from the left speaker. When you
set the analog value as 50, both speakers will have the same volume.
Enable or disable surround sound
Select SPDIF mode, selecting from RAW/PCM
Digital TV language selection: English/French/Spanish
Note : This item is adjustable only in DTV mode. It is not adjustable in ATV mode.
The default value is English.
1. Press [ MENU ] to display the main menu.
2. Press [
t
] and [
u
] to move the cursor to select the menu
"Sound," press [
▼
] to enter the menu "TV" and press [
▲
]
and [
▼
] to move the cursor to select an adjustment item.
3. Press [ t ] and [ u ] to change the analog value or state.
Function:
Volume Adjustment
Press [ VOL+ ] and [ VOL- ] to adjust the volume. Press [ VOL+ ] to increase the volume and press [ VOL- ] to
decrease the volume.
Mute
If you want to turn off the sound for a-while, press [ MUTE ] to enable the mute function and you will
see a mute icon appear on the screen. Press [ MUTE ] again to disable the mute function.
Special Attention
Please set the balance value as 50 in general cases.
★
★
Remote Control Shortcut Keys
Press [ SMART S ] to directly shift among Standard/Music/Movie/Sports/Personal.
Select Move
MENU
Return
Menu Language
Parental Controls
Time
Closed Caption
Menu Settings
Restore Default
VGA Settings
English
Setting
1. Press [ MENU ] to display the main menu.
2. Press [ t ] and [ u ] to move the cursor to select the menu
"Setting," press [
▼
] to enter the menu "Setting" and press
[
▲
] and [
▼
] to move the cursor to select an adjustment
item.
3. Press [
t
] and [
u
] to change the analog value. When
there is an icon " " on the screen, you can press [ u ] to
enter the next sub-menu or press [ MENU ] to exit the
current menu.