16
3.
Installation of Water-proof Jacket (supplied)
It is recommended to adopt the water-proof jacket (supplied) for the network interface when the camera is installed
outdoor.
Steps:
e)
If the network cable has been settled down, cut off the plug of the network cable first.
f)
Route the network cable through the following components in sequence: fix nut, water-proof ring, and the main body
of the water-proof jacket, as shown in the figure.
g)
Insert the water-proof ring into the main body of the water-proof jacket, to increase the sealing ability of the
components.
h)
Wire the plug and network cables up.
i)
Fix the O-ring to the network interface of the camera, and then connect the network cables.
j)
Wrap the network interface with the main body of the water-proof jacket, and then rotate the fix nut clockwise to
assemble it to the main body of the water-proof jacket.
Network Interface O-ring
Plug Water-proof Jacket Water-proof Ring Fix Nut Network Cable
Accessing via Web Browser
System Requirement:
Operating System: Microsoft Windows XP SP1 and above version / Vista / Win7 / Server 2003 / Server 2008 32bits
CPU: Intel Pentium IV 3.0 GHz to Core i7-4000 series or higher, depending on different video resolutions
RAM: 1G or higher
Display: 1024×768 resolution or higher
Web Browser: Internet Explorer 7.0 and above version, Apple Safari 5.02 and above version, Mozilla Firefox 3.5 and above
version and Google Chrome8 and above version
To view and configure the camera via LAN (Local Area Network), you need to connect the network camera in the same
subnet with your PC.
The following figure shows the cable connection of network camera and PC:
Steps:
1.
Open the web browser.
2.
In the browser address bar, input the IP address of the network camera, e.g., 192.0.0.64 and press the Enter key to
enter the login interface.
3.
Input the user name and password.
4.
Click Login.
