-
IMPORTANT!
Never use the vacuum cleaner without a motor filter.
Cleaning the exhaust air filter
The exhaust air filter cleans the air a final time before it leaves
the vacuum cleaner. You can clean the exhaust air filter as follows:
1. Switch off the vacuum cleaner and disconnect the plug from
the mains. To do this always pull on the plug and not on the cable.
2. Open the exhaust filter cover.
3. Brush or tap the HEPA filter over a bin.
4. Put the exhaust air filter back into place.
5. Close the exhaust filter cover.
IMPORTANT!
If any of the filters are heavily soiled they ( especially the black foam filter ) they
can be rinsed in water but if you do this you must allow them to dry for
24 hours
before reusing
the cleaner.
PLEASE NOTE
All the above instructions are very important if you are
experiencing a lack of suction or poor pick up when using you
vacuum cleaner.
These symptoms are a clear indication that your filter system
requires cleaning, if you follow the simple steps above you will
maintain a constant strong suction/pickup.
IMPORTANT
– never use your vacuum cleaner without the filters
fitted.
ENVIRONMENTAL TIPS
Once any electronic product is no longer functional, it should be disposed of in such a way as to cause
minimum environmental impact, in accordance with the regulations of your local authority. In most cases
you can take such products to your local recycling station.
exhaust filter
Don't forget to register for your 12 month guarantee at
www.vytronix.com
using product code brandnew-vytronix-vtbc01
