-8-
Warning: Please revise synchronous No.(6 digits) as soon as possible
after you read the user’s manual. The synchronous No. of all indoor monitors
in one household must be same.
Input the 3 digits Building No. such as 001, and then click “Next” to finish the
building No. setting.
The setting of Unit No.,Floor No, Room No., Device No., and Synchronous No.
is the same as Building No. setting. The Unit No., Floor No., and Room No. is
limited 2 digits respectively.
Device
Device
When
No. is set to be 0, we regard the indoor
monitor as the main; when
No. is set from 1 to 5, we regard it as the sub1 to
sub5.
Click icon on top right corner to make network setup, the system will enter
into the following interface:
1.4 Room
Click “Room” icon, then input 1-16 digits password (the default password is
123456 ) to enter into the following interface:
