background image

End the Call

Quickly press the multifunction button on the headset for 1 second. Afterwards, you
will hear a single beep. The call will be disconnected and the headset will revert to
Standby Mode.

Adjust Receive Volume

To adjust the volume in your earpiece, press the increase or decrease volume button
for 1 second, then release. Repeat until volume is at desired level. You will hear a
single beep each time you press the button.

Mute The Microphone On The Headset

To mute the microphone, press and 

hold down

the Increase Volume button for 4

seconds. You will hear a beep and the microphone will mute. A beep will be heard
periodically indicating that the microphone is in Mute Mode. This will not be heard on
the other end of the call. 

Un-Mute The Microphone On The Headset

To un-mute the microphone, press and 

hold down

the Increase Volume button for 4

seconds. You will hear a beep and the microphone will un-mute. 

Switch From Handset To Headset While On A Call

1. Before hanging up the handset, make sure the headset is in Standby Mode and then

activate the headset by pressing the multifunction button for 1 second. Afterwards,
you will hear a single beep and both handset and headset will be on the call.

2. Next, hang up the handset as you normally would. The call will remain active on

the headset until the parties end the call.

Switch From Headset To Handset While On A Call

1. Before disconnecting the headset from the call, remove the handset from the

phone’s cradle (corded phones) or turn the handset on (cordless phones). Both the
headset and the handset will be on the call.

15

Blue Parrott B100 Wireless Headset

Blue Parrott B100 Wireless Headset

12

HEADSET ADJUSTMENTS / MICROPHONE POSITIONING

The Blue Parrott B100 includes a professional grade headset that offers stability and
excellent audio quality. Microphone positioning is important to ensure proper
performance of the microphone.

Headset Adjustment

1. Place the headset on your head with the ear cushion on your left or right ear. 

2. Swivel the microphone boom up and over, if necessary, to bring it to the chosen

side.

3. Position the T-bar on the side of your head above your ear.

4. Slide headband in or out for a secure fit.

Microphone Positioning

1. The microphone has the word TALK or a small dot imprinted on it under the

cushion. This mark must face your mouth.

2. For good quality voice input and effective background noise cancellation, be sure

to position the microphone a finger’s width away from your face, just below your
bottom lip. 

Summary of Contents for BlueParrott B100



























Reviews: