4
Unpacking
The microscope is housed in a moulded Styrofoam container. Remove the
tape from the edge of the container and lift the top half of the container. Take
care to ensure that the optical items (objectives and eyepieces) do not fall out
and get damaged. Using both hands (one around the neck and one around
the base), lift the microscope from the container and put it on a stable desk.
1.
First of all remove all the components from the original package and store
the box in a safe and dry place.
2.
Place the main body of the microscope on a flat and sturdy surface.
Don’t connect the power supply cable at this stage.
3.
Place the attachment with analyzer /Bertrand Lens onto the main body and
turn the head locking screw (1).
4.
Insert the optical head and lock the screw.
5.
After removing the protection caps, fully insert both eyepieces.
