9
Connect the power cord
Check to confirm instrument power switch is turned off. Plug the female of the power
cord into the power inlet of the instrument and plug the male into the power outlet.
1
–
Power inlet
2
–
Power cord
3
–
Power outlet
Connect the constant temperature control cable
The instrument is turned off. As shown in the figure, insert one end of the constant
temperature control cable into the thermostat interface on the outside of the
spectrophotometer door insert and the other end into the constant temperature
control interface on the back of the controller.
1
–
Constant Temperature Control Port
2
–
Constant Temperature Control Cable
3
–
Constant Temperature Control Interface
1
3
2
1
3
2
