8
/
20
Installation
•
Adjustable base (Figure 1).
Figure 1
CAUTION! Loosen transportation lock Figure 2).
•
Hold the lift with your hand on the height position and remove the thumb screw on the back of
the appliance (a).
•
Once the transportation lock has been removed, the lift moves slowly to its upper end position.
The distance is 150mm.
•
Connect the device to the power supply using power cable (b).
•
Connect the heating bath to the device (c).
Figure 2
•
Remove the clamping device for the angle setting of the rotation drive on the right side of the
lift by rotating the knurled screw (d) counterclockwise.
•
Set the drive at an angle of approx.30° (Figure 3)
•
Then secure the rotation drive from being accidentally turned by tightening the knurled screw
in a clockwise direction.
