VWR 390-1351, Instruction Manual, Page: 38 / 54

Instruction Manual INCU-Line Premium Peltier Cooled
Page 38 / 54
Confirms and saves changes
Cancels the entered changes
In the field "lower alarm temp" you can set a value of -
1°C to - 5°C and in the field "upper alarm
temp" you can set a value of +1°C to +5°C.
5.18. Network
In this panel (Figure 42) you can change the settings for the network. Switch between the type of LAN / WiFi
network, press the icon or .
LAN settings
(Figure 42)
•
IP
– the device’s IP address
•
Mask
– an Ethernet network mask to which the device is connected
•
Gate
– Server’s IP address or router’s that manages the Ethernet network
•
DNS
– IP address of the domain name system
•
MAC
– the address of the network card, read-only
•
DHCP
– you can select if the server that allocates IP addresses is running on the local network. You
can then skip setting IP, Masks, Gates
Only one type of network can be active.
After changing the network type, it may be necessary to restart the device.
Figure 41 - Alarm settings