3
Installation
When selecting the location for device, please consider the following:
- Put the device on horizontal, leveled and stable place.
- Leave enough space around the device for normal air circulation, easy access and maintenance
(minimum 10 cm).
- Avoid locations with fast temperature and humidity changes.
- Avoid locations with direct sunlight and nearby heating devices, such as radiators, autoclaves, etc.
- Avoid locations subject to shocks and vibrations.
Ensure easy access to the rocker control panel and mains plug in case of emergency.
Check the data label on the back side of the device for voltage, frequency and power consumption
requirements. Voltage should not vary for more than 10% from the data label rating.
Connect the power cord, which is included in the delivery, into the mains socket on the back side of the
device. Then connect the other end of the cord to a grounded wall socket. Avoid lines on which powerful
electric motors, refrigerators and similar devices are connected
Intended
use
VWR Rocking Platform is a general purpose shaker, intended for shaking (rocking) of samples at speeds
from 10 to 120 rocks Per Minute. It is driven by the asynchronous gear motor, which enables reliable
operation and constant rocking speed, independent of the load or power supply oscillations.
Device mechanism consists of two main parts:
- Motor with eccentric mechanism
- Control electronics
Motor movement causes rocking movement and generates rocking effect.
Electronics controls motor speed (RPM) and time of operation (min).
For research use only. Not intended for any animal or human therapeutic or diagnostic use.
This equipment must be used only for its intended applications. Any alterations or
modifications will void your warranty and may cause injury.