16
9
PERSONALIZE YOUR VWR Electronic Pipette
Tip-ejector extension for use VWR Electronic Pipette 10µl Single and Multi channels:
In order to eject 10µl tips, tip-ejector extensions are
supplied with VWR Electronic Pipette 10µl Single
and Multi channels.
The tip-ejector extension for Single channel which is made of PVDF
(polyvinylidene Fluoride),is
autoclavable,
as well as the one
of the Multi-channel which is in PBT.
To
fit a tip-ejector extension for the Single Channel:
• Hold the pipette with the push-button upright.
• Hold the extension with the slot upright.
• Slide the extension over the tip-holder.
• Push the extension firmly onto the end of the tip-ejector until
it clicks into place (see opposite).
To remove a tip-ejector extension
(see opposite):
• Hold the pipette in one hand and grip the extension with the other.
• Gently twist the extension (either direction) and pull it away from
the pipette
To
fit and remove a tip-ejector extension for the Multi Channels:
• Slide the extension over the tip-holder.
• Push the extension firmly up into the slots to fit and pull it out to remove it
(see below)
Summary of Contents for VWR 10
Page 31: ...31 19 REPLACEMENT PARTS COMING SOON...
Page 32: ...32 APPENDIX 1 EXAMPLE OF A PERFORMANCE CHECK example with VWR10 at 1 l...
Page 33: ...33 APPENDIX 2 Z FACTOR...
Page 52: ...52...
