Lit M00074
VWR Mini Blot Mixer, Version 2, 04/01/2012
Installation
Place the mixer on a horizontal, level and stable surface. Connect the plug end of the cord to a grounded wall socket. Avoid
lines on which powerful electric motors, refrigerators and similar devices are connected. Use the on/off switch to control
power to the mixer.
Use caution when plugging into a grounded wall socket!
Do not touch plug with wet hands!
Do not unplug by pulling on the cord!
Intended use
The VWR Mini Blot Mixer combines the actions of a rocker and a shaker to produce a three dimensional
motion that is gentle enough for fragile gels and blots, yet provides thorough mixing. Designed for processing
blots and staining applications, the pitch and speed of the mixer are optimally set to allow for use of a minimal
amount of solution while preventing the membrane or gel from drying out.The flat rubber mat is ideal for
holding blotting boxes or trays.
For research use only. Not intended for any animal or human therapeutic or diagnostic use.
Symbols and conventions
The following chart is an illustrated glossary of the symbols that may be used in this
manual or on the product
.
The electrical warning indicates the presence of a potential hazard which could result
in electrical shock.
CAUTION
This symbol refers you to important operating and maintenance (servicing)
instructions within the product Instruction Manual. Failure to heed this information
may present a risk of damage or injury to persons or equipment.
This symbol identifies a Protective Earth (PE) terminal, which is provided for
connection of the supply system’s protective earth (green or green/yellow) conductor.
