12
MAINTENANCE
Note: Disconnect the power cord from the power source before performing any
service or maintenance on this unit.
7.1 Cleaning:
Cleaning and decontamination are recommended on a regular basis. To
prepare the unit for cleaning, remove all interior parts if assembled, such as shelves
and shelf clips.
First clean the chamber with soap and water, rinse and let dry. To decontaminate
use a solution that is appropriate to your application. DO NOT USE chlorine-based
bleaches or abrasives as this can damage the stainless steel components. DO
NOT USE spray cleaners that might leak through openings and cracks and get on
electrical parts or that may contain solvents that will harm the coatings.
WARNING: Never clean the unit with alcohol or flammable cleaners with the unit
connected to the electrical supply. Always disconnect the unit from the electrical
service when cleaning and assure all volatile or flammable cleaners are evaporated
and dry before reattaching the unit to the power supply.use care when cleaning the
door gasket to prevent damage which could impair the positive door seal.
7.2 Storage:
To prepare the unit for storage, remove all shelves and shelf clips, dry the
chamber completely and disconnect the power supply. Be certain that the door is
positively locked in the closed position. See Section 3.3, Lifting/Handling, for proper
transport procedures.
7.3
No maintenance is required on the electrical components. If the unit fails to operate
as specified, please see the Troubleshooting guide Section 8.0, before calling for
service.
Section
7
